Metal Roofing in Claude
Claude is a community within the Amarillo area of Texas, located in Armstrong County (population ~1,200). County seat of Armstrong County southeast of Amarillo/Canyon near Palo Duro Canyon State Park; small-town residential, mostly single-family on larger lots.
Recommended Metal Roof Types
Standing seam steel (concealed fastener, 24-26 gauge, PVDF/Kynar 500 finish)
Best overall performer for hurricane wind-uplift resistance (rated systems tested to 120-150+ mph), thermal movement tolerance in extreme heat swings, and premium curb appeal for Hill Country and coastal custom homes; concealed fasteners eliminate the leak points that fail first in wind events.
Stone-coated steel shingle/tile profile
Popular where HOAs or historic character require a traditional shingle or tile look (San Antonio, Central Texas Spanish-style neighborhoods) while gaining Class 4 impact rating for hail and better wind performance than composition shingle.
Aluminum standing seam
Preferred within a few miles of the Gulf Coast (Galveston, Corpus Christi, Port Aransas) because it will not rust from salt-air corrosion the way coated steel eventually can.
Exposed-fastener steel (26-29 gauge ag panel)
Cost-effective, widely used on rural ranch homes, barns, and outbuildings across West and Central Texas; lower upfront cost but requires more maintenance of fastener seals in high-UV/thermal-cycling climate.
Class 4 impact-rated metal panels (any profile)
Specifically marketed and installed to qualify for Texas insurer hail-discount programs given the DFW/Central Texas hail corridor is the top loss driver in the state.
Weather Perils in Claude
- Severe hailstorms (frequent, large-diameter hail — Amarillo metro is in one of the highest hail-frequency zones in the US)
- High sustained winds and wind gusts (Amarillo is frequently cited as one of the windiest US cities)
- Tornadoes (western edge of Tornado Alley; documented tornado hits in 1949, 1968, 1970, 1982, 1986, 2001, 2007, 2013, 2015, 2016)
- Dust storms / high wind-driven dust events
- Extreme temperature swings and 'blue norther' cold-front events
- Periodic drought and, less frequently, flash flooding after severe storms
- Expansive clay/caliche soils affecting foundation and structural load considerations (indirectly relevant to roof/wall load paths)
Typical Installed Cost
Installed residential metal roofing in Texas typically runs about $9-$16 per sq ft for standing seam steel (roughly $850-$1,600 per square/100 sq ft), $6-$10 per sq ft for exposed-fastener steel panels, and $10-$18+ per sq ft for aluminum standing seam or premium stone-coated steel systems, before insurance offsets; complex Hill Country rooflines, steep pitches, and coastal wind-rated assemblies push toward the higher end.
Neighborhoods We Serve in Claude
- Downtown Claude
- Certified MetalVue metal-roofing pros serving Downtown Claude, Claude.
Find a Certified MetalVue Professional Near Claude
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.