Metal Roofing in Raleigh
Raleigh is a hub of the Raleigh (Raleigh-Cary MSA) area of North Carolina, located in Wake County (population 460,000+ (largest city in metro; NC state capital)). Core city; historic in-town neighborhoods under Raleigh Historic Development Commission review plus large North Raleigh suburban tracts.
Recommended Metal Roof Types
Standing seam (mechanically seamed, concealed-fastener) steel or aluminum
Best wind uplift performance for coastal/hurricane exposure and the FORTIFIED Roof-eligible construction the NCIUA grant programs target; also sheds snow/ice well in the mountains and is the preferred premium choice statewide.
Aluminum standing seam
Naturally corrosion-resistant, recommended over bare steel for the immediate coastal strip/Outer Banks salt-air exposure.
Stone-coated steel shingle/tile panels
Popular for matching traditional/coastal and historic-district aesthetics (shake, slate, tile look) while retaining Class A fire and high impact resistance.
Exposed-fastener corrugated/ribbed steel (26-29 gauge)
Lower-cost option common on rural, agricultural, and budget re-roofs; adequate for inland/Piedmont wind zones but not preferred in high hurricane wind zones versus standing seam.
Weather Perils in Raleigh
- Severe thunderstorms and large hail (spring/summer convective season)
- Tornadoes (inland tornado corridor; EF3 hit Raleigh April 2011, F4 in 1988)
- Inland hurricane wind and heavy rain/flooding from decaying tropical systems (Hazel 1954, Fran 1996, Matthew 2016, Florence 2018)
- Ice storms and occasional heavy wet snow in winter
- High summer UV/heat load affecting roof coatings and attic temps
- NOT a coastal/HVHZ market (HVHZ is Florida-specific) and generally not IRC 'hurricane-prone region' territory since Wake/Johnston/Franklin sit inland of the coastal-plain cutoff
- Limited Wildland-Urban Interface (WUI) exposure compared to western NC; not a primary local driver
Typical Installed Cost
Typical NC installed costs run roughly $9-$14/sq ft for exposed-fastener corrugated/ribbed panel systems, $12-$22/sq ft for standing seam steel, and $12-$25+/sq ft for aluminum standing seam or stone-coated steel shingle systems, with premium coastal-rated (FORTIFIED-compliant, sealed-deck, heavier-gauge) standing seam installations trending toward the higher end of these ranges.
Neighborhoods We Serve in Raleigh
- Bartons Creek Bluffs
- Boylan Heights
- Brier Creek
- Five Points
- Glenwood-Brooklyn
- Hayes Barton
- Historic Oakwood
- Mordecai
- North Hills
- Wakefield
- Certified MetalVue metal-roofing pros serving Bartons Creek Bluffs, Raleigh.
- Certified MetalVue metal-roofing pros serving Boylan Heights, Raleigh.
- Certified MetalVue metal-roofing pros serving Brier Creek, Raleigh.
- Certified MetalVue metal-roofing pros serving Five Points, Raleigh.
- Certified MetalVue metal-roofing pros serving Glenwood-Brooklyn, Raleigh.
- Certified MetalVue metal-roofing pros serving Hayes Barton, Raleigh.
- Certified MetalVue metal-roofing pros serving Historic Oakwood, Raleigh.
- Certified MetalVue metal-roofing pros serving Mordecai, Raleigh.
- Certified MetalVue metal-roofing pros serving North Hills, Raleigh.
- Certified MetalVue metal-roofing pros serving Wakefield, Raleigh.
Find a Certified MetalVue Professional Near Raleigh
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.