Metal Roofing in St. Marks
St. Marks is a community within the Tallahassee area of Florida, located in Wakulla County (population ~274 (small coastal city)). Small Gulf-coast historic fishing town at the confluence of the St. Marks and Wakulla Rivers; FEMA VE/AE coastal flood zones and DEP Coastal Construction Control Line apply.
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in St. Marks
- Frequent severe thunderstorms and lightning (Florida/the Big Bend region ranks among the highest lightning-strike density in the US)
- Hurricane and tropical-storm remnant wind/rain (inland but exposed to storms tracking up from the Gulf, e.g., Hurricane Michael 2018, Hurricane Idalia 2023, Hurricane Debby 2024)
- Heavy, humid-subtropical rainfall with high year-round precipitation and afternoon downpours
- Falling limbs/debris from mature live-oak canopy common throughout Tallahassee neighborhoods
- Occasional severe hail with spring/summer storm cells
- Elevated wildfire/WUI risk near the Apalachicola National Forest (Woodville, Crawfordville, parts of Wakulla/Leon)
- Coastal flooding, storm surge, and CCCL exposure in Wakulla's Gulf-adjacent communities (St. Marks, Panacea)
- Algae/mildew growth on roofing due to high humidity, requiring algae-resistant coatings
- Rare but disruptive winter ice/freeze events (notably January 2014 and January 2025 ice storms)
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in St. Marks
- Downtown St. Marks Historic District
- Riverside
- Certified MetalVue metal-roofing pros serving Downtown St. Marks Historic District, St. Marks.
- Certified MetalVue metal-roofing pros serving Riverside, St. Marks.
Find a Certified MetalVue Professional Near St. Marks
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.