Metal Roofing in Largo
Largo is a community within the St. Petersburg / Clearwater area of Florida, located in Pinellas County (population large suburb (~83,000)). Central Pinellas suburb; mix of 1960s-80s ranch subdivisions and golf-course communities (Bardmoor).
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in Largo
- Hurricanes and tropical storms (June-November)
- Wind-borne debris / straight-line high wind events
- Storm surge and coastal/tidal flooding on barrier islands and bayfront parcels
- Frequent intense summer afternoon thunderstorms and lightning (Tampa Bay area is a lightning capital of the US)
- Occasional severe hail with summer storms
- Salt-air / high-humidity corrosion on coastal and barrier-island homes
- Prolonged intense UV exposure
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in Largo
- Anona
- Bardmoor
- Belleair Groves
- East Bay
- Ridgecrest
- Certified MetalVue metal-roofing pros serving Anona, Largo.
- Certified MetalVue metal-roofing pros serving Bardmoor, Largo.
- Certified MetalVue metal-roofing pros serving Belleair Groves, Largo.
- Certified MetalVue metal-roofing pros serving East Bay, Largo.
- Certified MetalVue metal-roofing pros serving Ridgecrest, Largo.
Find a Certified MetalVue Professional Near Largo
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.