Metal Roofing in Jacksonville
Jacksonville is a hub of the Jacksonville area of Florida, located in Duval (population large (900k+ city)). Historic river-front neighborhoods (San Marco, Riverside/Avondale, Ortega) mix Mediterranean Revival, Colonial Revival and Craftsman homes; suburban Mandarin/Southside/Arlington are dominated by 1970s-2000s ranch and traditional-style subdivisions. Riverfront lots require FEMA/BFE compliance.
Recommended Metal Roof Types
Standing seam metal roofing (steel or aluminum, mechanically seamed, concealed fasteners)
Best-in-class wind uplift performance, no exposed fasteners to work loose or corrode, qualifies for the strongest wind-mitigation insurance credits, and is the assembly type most likely to carry Miami-Dade NOA / HVHZ approval and Florida Product Approval (FL#) listings needed for HVHZ and wind-borne debris regions.
Aluminum standing seam / panels
Naturally corrosion- and rust-proof, making it the preferred substrate within a few miles of saltwater (barrier islands, Keys, both coasts) where steel would need heavier coating protection; also lightweight for retrofit over existing structures.
Galvalume / coated steel standing seam
Cost-effective alternative to aluminum for inland and non-immediate-coastal homes, with strong corrosion resistance from the aluminum-zinc coating and widely available FL Product Approval listings.
Stone-coated steel metal shingles/tile profiles
Popular in HOA communities and Mediterranean-style neighborhoods that require a tile or shake appearance, letting homeowners get metal's wind/impact performance while meeting deed-restricted aesthetic requirements.
PVDF (Kynar 500)-coated panels in any of the above
The reflective, fade- and chalk-resistant coating is heavily recommended for Florida's intense UV and heat load, supporting Cool Roof energy performance and long-term color retention versus SMP or unpainted coatings.
Weather Perils in Jacksonville
- Hurricanes and tropical storms (Atlantic hurricane season June-November; storm surge and wind-driven rain along the coast and St. Johns River)
- High sustained coastal winds and wind-borne debris on barrier islands (Jacksonville Beach, Atlantic Beach, Neptune Beach, Ponte Vedra Beach, St. Augustine Beach, Fernandina Beach/Amelia Island)
- Intense summer thunderstorms with frequent lightning (Jacksonville is one of the most lightning-prone metros in the US) and hail
- Heavy wind-driven rain and afternoon downpour intensity requiring robust underlayment/sealed-seam roofing
- High UV/solar heat load and humidity driving demand for reflective, cool metal roof coatings to cut cooling costs
- Coastal salt-air corrosion on barrier islands and Intracoastal-adjacent homes, favoring marine-grade aluminum or coated steel
- Occasional wildfire risk in the Wildland-Urban Interface areas of inland Clay and Baker County
- Flooding/storm surge along the St. Johns River, Intracoastal Waterway, and tidal creeks (Ortega, Julington Creek, Doctors Lake)
Typical Installed Cost
Statewide installed cost is roughly $8-$20 per sq ft depending on material and profile: corrugated/exposed-fastener steel panels run about $3.50-$8/sq ft installed (roughly $8-$16/sq ft including labor per some vendor breakdowns); standing seam steel or aluminum typically runs $10-$20/sq ft installed (some premium/HVHZ-compliant installations reaching $10-$35/sq ft); copper and zinc are the luxury tier at roughly $14-$40/sq ft. For an average ~2,000 sq ft Florida home, total standing seam project costs commonly fall in the $20,000-$40,000 range. Costs run higher in HVHZ jurisdictions (Miami-Dade/Broward) due to NOA-compliant materials, permitting, and inspection requirements.
Neighborhoods We Serve in Jacksonville
- Arlington
- Baymeadows
- Deerwood
- Julington Creek
- Mandarin
- Ortega
- Riverside/Avondale
- San Jose
- San Marco
- Southside
- Certified MetalVue metal-roofing pros serving Arlington, Jacksonville.
- Certified MetalVue metal-roofing pros serving Baymeadows, Jacksonville.
- Certified MetalVue metal-roofing pros serving Deerwood, Jacksonville.
- Certified MetalVue metal-roofing pros serving Julington Creek, Jacksonville.
- Certified MetalVue metal-roofing pros serving Mandarin, Jacksonville.
- Certified MetalVue metal-roofing pros serving Ortega, Jacksonville.
- Certified MetalVue metal-roofing pros serving Riverside/Avondale, Jacksonville.
- Certified MetalVue metal-roofing pros serving San Jose, Jacksonville.
- Certified MetalVue metal-roofing pros serving San Marco, Jacksonville.
- Certified MetalVue metal-roofing pros serving Southside, Jacksonville.
Find a Certified MetalVue Professional Near Jacksonville
Tell us about your project and a certified Sherwin MetalVue professional in your area will follow up with a free, no-obligation estimate.
Sherwin-Williams is not liable for the conduct, performance, or workmanship of any contractor.